TeleBT provides the equivalent of a TeleDongle, with both USB and Bluetooth for connection to the ground station computer or mobile device.
The RF filter components are set for use in the vicinity of 435 Mhz.
For the latest TeleBT firmware and related software, please
visit the AltOS and AltosDroid pages on this
site. There is also a compatible iOS application available for sale from our
friends at Iron Sheep Productions.
If you're using TeleBT with an Arrow yagi,
we now have a 3D-printable mount design available!
Features
User View
- 70cm ham-band transceiver compatible with Altus Metrum products,
programmed for 38k4 GFSK data rate with forward error correction
- Bluetooth / Bluetooth LE radio
- micro USB interface
- 4 pin Tyco MicroMaTch connector for debug and flash programming
- 850mAh LiPo battery charged via USB
Developer View
- ARM Cortex-M0 MCU
- 32k Flash
- 6k RAM
- USB 2.0 Full Speed
CC1200 Low Power, High Performance RF Transceiver
RN4678 Bluetooth module
Firmware Features
- Written mostly in C with some ARM assembler
- Runs from on-chip flash, uses on-chip RAM
- USB serial emulation for data interface
Tools Used
- gEDA for schematic capture and PCB layout
- GCC compiler and source debugger
Licenses
Artifacts
There is a single manual for all Altus Metrum products,
which is available in html and
pdf formats.
The hardware design current gEDA files are available from
git.gag.com in the project
hw/teleshield.
For those who don't have ready access to the gEDA suite, here are pdf snapshots
of the files for Production PCB version 4.0 in more easily readable form.